My contact person
Select location

After selection of your ZIP code, we designate the relevant staff to attend to you at once.

Plate strips

Wear problems are solved quickly and cost-effectively with a large selection of bar stock products from igus®. They are long-lasting and their shape can be adapted individually. Plastic bar stock products made of iglidur® material do not need any additional lubrication and are maintenance-free. They have been specially developed for dynamic applications, have low coefficients of friction and are very hard-wearing. This substantially lengthens the service life of your application. iglidur® bar stock products are available as round rods, tubes or plates of different lengths. Upon request, they can be machined if special shapes are needed. Depending on the application, different iglidur® materials with specific properties can be selected. For example, there are iglidur® plastic bar stock products that withstand temperatures up to +250 °C or have been certified for food and drinking-water applications.

Filter

Core Requirements
Requirements
Material

Due to order peaks, the delivery time is 5-8 working days longer than stated. Please refer to our order confirmation for the specific delivery date. For urgent, short-term requirements, please contact us personally so that we can realise the delivery time necessary for you. You will find your contact person at the top of the menu under "My contact person", next to the language/country selection, or on this page.

Number of products: 10

iglidur® A500, plate strips
  • Compliant with EU regulation 10/2011 EC, FDA-compliant
  • Temperature resistant from -100°C to +250°C
  • High chemical resistance
  • Choose the standard length of 1,000mm or have a length cut to size from 100mm
iglidur® J4, plate strip
  • Low-cost material for large volume production
  • For a low coefficient of friction
  • Good media resistance
  • Low moisture absorption
  • Choose the standard length of 1,000mm or have a length cut to size from 100mm
iglidur® JB, plate strips
  • Low wear
  • Low coefficient of friction
  • Low moisture absorption
  • Good media resistance
iglidur® A350, plate strips
  • For use with temperatures up to +180°C
  • Comply with FDA requirements
  • For medium to high loads
  • Equally good for both rotating and pivoting applications
  •  Complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Choose the standard length of 1,000mm or have a length cut to size from 100-900mm
iglidur® RW370 plate strips
  • Complies with the fire protection standard DIN EN 45545  HL3, R22/R23
  • Flame retardant
  • High wear resistance
  • Low coefficient of friction
  • Choose the standard length of 1,000mm or have a length cut to size from 100mm
iglidur® J350, plate strip
  • Excellent coefficient of friction against steel
  • Continuous operating temperature of up to +180°C
  • For medium to high loads
  • Particularly well suited to rotational movement
  • Complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Choose the standard length of 1,000mm or have a length cut to size from 100mm
iglidur® HSD350, plate strips
  • Sterilisable
  • For continuous use up to +180°C
  • High media resistance
  • Corrosion-free
  • For wet environments
  • Choose the standard length of 1,000mm or have a length cut to size from 100mm
iglidur® W300, plate strips
  • For especially long service life
  • Low coefficient of friction
  • Extremely high wear resistance
  • Also suitable for soft shafts
  • Resistant to dirt
  • Choose the standard length of 1,000mm or have a length cut to size from 100mm
iglidur® X, plate strips
  • Continuous operating temperatures from -100 to +250°C
  • Extremely high chemical resistance
  • Complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • High compressive strength
  • Choose the standard length of 1,000mm or have a length cut to size from 100mm
iglidur® C500, plate strips
  • High chemical and temperature resistance
  • Resistant to water vapour
  • Good coefficient of friction and wear
  • Choose the standard length of 1,000mm or have a length cut to size from 100mm

Consulting

I would be happy to answer your questions personally

Shipping and consultation

In person:

Monday to Friday from 7 am - 8 pm.
Saturdays from 8 am- 12 pm.

Online:

24h